I-V curve tutorial problem

[hasanahmad]

I am using the mini-tutorial for I-V curve
http://www.quantumwise.com/publications/tutorials/mini-tutorials/98-i-v-curve-and-voltage-drop#appendix

and have downloaded the 'lih2li_iv_scf.nc' file and using the 'lih2li_iv_analysis.py' file to run it, and I am getting the error:

Traceback (most recent call last):
  File "c:\users\hasan~1\appdata\local\temp\1399686007874424.py", line 14, in <module>
    calculator = configuration.calculator() 
AttributeError: 'list' object has no attribute 'calculator'

I have even tried with the absolute path-name of the files.

What could possibly have gone wrong?

[Anders Blom]

Apologies, a small typo in the script, which was updated recently, caused this. Try again - should be fine now.
 
When downloading the script again, make sure you don't get a local cached version. The mistake was on line 8, which should have been

Code: (python)

configurations = [configurations[j] for j in numpy.argsort(biases)]

[hasanahmad]

Thank you. It solved the problem.

[dhurba]

I am getting this Error after the above step . ...Is it not possible with EHT ?

+------------------------------------------------------------------------------+
| NanoLanguageScript execution started                                         |
+------------------------------------------------------------------------------+
+------------------------------------------------------------------------------+
|                                                                              |
| Atomistix ToolKit 11.8.0 [Build 308f600]                                     |
|                                                                              |
+------------------------------------------------------------------------------+
Traceback (most recent call last):
  File "/tmp/1360052463028704.py", line 18, in <module>
    zero_bias_potential = EffectivePotential(configuration)
  File "./zipdir/NL/Analysis/EffectivePotential.py", line 37, in __init__
  File "./zipdir/NL/Analysis/Analysis.py", line 74, in __init__
  File "./zipdir/NL/Analysis/Analysis.py", line 66, in _supportConfigurationWithCalculator
  File "./zipdir/NL/Analysis/Analysis.py", line 52, in _supportCalculator
NL.ComputerScienceUtilities.Exceptions.NLTypeError: The DeviceHuckelCalculator does not support calculation of EffectivePotential.
+------------------------------------------------------------------------------+
| NanoLanguageScript execution finished                                        |
+------------------------------------------------------------------------------+

[Anders Blom]

For Huckel you can use the ElectrostaticDifferencePotential instead, this is perhaps an even better choice, in fact, also for DFT (although the qualitative picture tends to be very similar for EffectivePotential).

[dhurba]

For Huckel you can use the ElectrostaticDifferencePotential instead, this is perhaps an even better choice, in fact, also for DFT (although the qualitative picture tends to be very similar for EffectivePotential).

So i should add TransmissonSpectrum Also when adding ElectrostaticDifferencePotential in the script generator  ?

What is the meaning of the line "  calculator(electrode_voltages=(0.5*bias,-0.5*bias)), " ?

[Anders Blom]

1) If you want to calculate it, yes.

2) This sets the bias.

[baizq]

Apologies, a small typo in the script, which was updated recently, caused this. Try again - should be fine now.
 
When downloading the script again, make sure you don't get a local cached version. The mistake was on line 8, which should have been

Code: (python)

configurations = [configurations[j] for j in numpy.argsort(biases)]

Yes, I have also encountered the same error and this modification solves the problem. Why not changing the iv-curve and voltage-drop tutorial as well...

Besides...just for kidding, why my account level drops from heavy ATK user to regular ATK user...

[Anders Blom]

Yes of course - I was certain I did already...? But now it is fixed, for sure!

Edit: Ah, I had changed it in the downloadable script, but not on the page. The danger of having the same source in two places...

Sorry for dropping your rating, we adjusted the levels a bit to better reflect the intensity with which people interact with the Forum. In the beginning we were a bit generous with how many posts you needed to get a higher status, but then we got a top-heavy distribution of profiles.

[baizq]

And there might still be some mistakes within the script if we divided the previously converged scf run for each voltage into separate .nc files.

I have substituted the first 6 lines in the script with

Code:

# Define input and output NetCDF files here   
scf_filename = "CMS-Ag-p_scf_%g.nc.nc"
analysis_filename = "CMS-Ag-p_analysis.nc"   
 
biases = [0, 0.1, 0.2, 0.3]
# Read configurations from NetCDF files
configurations = []
for bias in biases:
     configurations.append(nlread(scf_filename % bias, DeviceConfiguration)[0])

And the program still returns error message when the running nearly ends.

Code:

Traceback (most recent call last):
  File "iv-voltage_drop.py", line 48, in <module>
    geometry = nlread(scf_filename, DeviceConfiguration, read_state = False)[0] 
  File "./zipdir/NL/IO/NLSaveUtilities.py", line 244, in nlread
NL.ComputerScienceUtilities.Exceptions.NLValueError: The filename, CMS-Ag-p_scf_%g.nc, was not found - please check correct path and name.

The error might comes from the fact that the nlread command has not been incorporated into the loop over %g... so it seems not sufficient to only subsitute the first six lines...then how should we modify the script...

[Anders Blom]

Yes, I see. You should also modify line 45 in the original script to be

Code:

geometry = nlread(scf_filename % 0, DeviceConfiguration, read_state = False)[0]

(Do you mean to have .nc.nc in the scf_filename?)